Posts

Showing posts with the label indoor

How To Make a Boxing Cobra Punching Bag Using the Kewlus Spring

Image
Intro Make your own Cobra Punching Bag at home that is faster than some of the top brands on the market at just a fraction of the cost. To make it super easy I designed and produced a custom spring specifically for this purpose. I made it so that you can simply screw it onto a 3/4 inch galvanised steel pipe. If you have any questions please put them in the comments below and I'll respond as soon as I can. Also please share your thoughts and experience with others here if you make one. Items You'll Need: Kewlus Spring (KS9) - purchase here:  https://kewlus.com/products/kewlus-spring-v1 Base pipe: galvanised  3/4 inch pipe  (1.05 inches outer diameter) the length of roughly half your height. I used a 3 foot long pipe for my height (I'm 6ft tall). The 3/4 inch pipe has an outer diameter that is 1.05 inches. The spring is designed to fit perfectly onto this pipe. You can also combine sections of pipe using a coupling , for example 2ft section and 1ft section to allow re...

The 1st Prototype of the Kewlus Boxing Cobra

Image
Today I unveil the very first prototype of the Kewlus Boxing Cobra - the weapon of choice for fighters wanting to sharpen their reflex skills! But it's not just for the pros - it's for everyone, including kids! For all the details and to be added to the Early Access list visit BoxingCobra.com right now (first come, first get)! See you in the next video!

How To Make a Free-Standing Punching Bag

Image
10-Step Instructions: Get 13 pool noodles (for a 6 foot tall punching bag), a roll of cheap packing tape and a roll of cheap cling wrap (or two). For your pole get a one inch wide PVC pipe - roughly 6 foot long. For your platform get an MDF (particle) board at least 2 foot wide and 1/2 inch thick. Alternatively if you don't want to make the base, you can simply use an umbrella base such as this one from Amazon:  https://amzn.to/3nY3J19 . For mounting your pole, get a one inch galvanised steel pipe roughly one foot long and a flange to mount it. You'll also need 4 thick, short screws to fix the flange onto your board - these are ideal: https://amzn.to/3gCO82H . Note, if you want to make your punching bag more rigid, use a two foot galvanised pipe. For fixing your PVC pipe onto your galvanised pipe you will also need a one inch hose clamp. Setup your platform and pole: screw the flange onto one end of your board; insert the galvanised pipe into one end of the PVC pipe and lock ...

How To Make a Boxing Spar Bar - Pro Version

Image
10-Step Instructions: Get a ball - basketball is best. Also get a plunger, remove the handle and tape it onto the ball with duct tape. This can be screwed onto the top of your spar bar to help dampen vibrations and for light punches. Get a pair of ball bearings roughly 1 inch internal diameter and 2 inches external diameter. You can get a 2-pack of the exact bearings that I use on Amazon US here:  https://amzn.to/34eLo7r or from Bunnings in Australia:  https://www.bunnings.com.au/richmond-47-x-25-x-12mm-rubber-sealed-precision-ball-bearing-pack-of-2_p0103240 Get a PVC pipe Tee or Cross junction into which your ball bearings will fit. Size will depend on the size of your ball bearings - for the bearings above, I'm using a 40mm Cross junction which has an internal diameter of roughly 48.3mm (eBay:  https://ebay.us/ld0S6e or Bunnings link:  https://www.bunnings.com.au/holman-40mm-press-pvc-plain-tee_p3142376 ). Tape around each ball bearing to ensure a tight fi...

How To Make a Boxing Spar Bar - Simple Version

Image
10-Step Instructions: Get a ball - basketball is best. Tape it to a plunger. Get a 1 inch metal pole about chin height. Get a 1 inch PVC pipe and Tee joint. Get a large umbrella stand. Get a pool noodle. Insert your metal pole into the umbrella stand. Cut the PVC pipe to about an arm-length and glue on the Tee joint. Insert your Tee with the PVC arm onto the top of your metal pipe. Secure the Tee in place by using two hose clamps of appropriate size on the metal pipe - one above and one below the Tee. Make sure to leave a small gap so that the Tee rotates freely. Use a section of pool noodle on the arm as padding and ability to extend the length of the arm. Good luck making it and hope you enjoy! If you have any questions feel free to ask them in the comments below. More Detailed Instructions: This project is one of many projects in my  Fighter DIY eBook . The eBook contains complete detailed and fully illustrated instructions that you can follow with ease...

How To Make a Cobra Reflex Punching Bag at Home

Image
10-Step Instructions: Get a ball - soccer ball or volleyball is ideal. Get a drain plunger and good quality duct tape and tape the plunger onto the ball, ensuring not to cover the air inlet. AmazonUS:  https://amzn.to/304M8eJ For the base get a 2 foot wide MDF or "particle" board. For the mast/pole, get a 1-inch diameter PVC pipe (in Australia this is referred to as 20mm; in US it’s referred to as 3/4 inch) - you'll need roughly shoulder height. AmazonUS:  https://amzn.to/2XopfRy For the base you'll need a short 1/2 inch galvanised steel pipe. The length of the steel pipe should be roughly 1 foot and will dictate the speed - faster with a longer steel pipe. AmazonUS:  https://amzn.to/2Xo2gpJ . You'll also need the corresponding flange to mount the pipe onto your board. Amazon US:  https://amzn.to/36Tbfm8 Attach the flange to one side of your board with thick, short screws. You will need to drill appropriate size pilot holes first to allow your screws t...

How To Make Boxing Gloves

Image
If you can't afford a new pair of boxing gloves, but have a pair of wraps, you can easily make DIY boxing gloves using the wraps and a pair of flip flops. Steps To Make Boxing Gloves: Get a pair of wraps or make a pair using an old t-shirt. Get an old pair of flip flops - buy a cheap pair for $1 if you don't have any. Place each flip flop on the back of your hand and wrap it to your hand with your wrap all the way from your wrist to your fingers. Good luck making it and hope you enjoy! If you have any questions feel free to ask them in the comments below. More Detailed Instructions: This project is one of many projects in my  Fighter DIY eBook . The eBook contains complete detailed and fully illustrated instructions that you can follow with ease.  Download it today! Related Video: https://youtu.be/TPRd1poK4f4